SMG NDT Ltd

Johnson & Allen NEOASTRA DGCW Fluorescent Magnetic Ink Concentrate

£17.50

Clear

Neoastra DGCW is a fluorescent magnetic ink for use in MPI and was formulated to give defined indications using the highest grade of magnetic particles which were selected for their response to very low magnetic fields and for low coercivity. Neoastra DGCW is ideal for the inspection of welds, pressure vessels, structures, pipes, castings, forgings and most other ferromagnetic components.

Neoastra DGCW should be viewed using a UV light with a surface intensity exceeding 1000μW/cm2 with the benefit of allowing moderate ambient light. Anecdotally it has been demonstrated that defects can be found with up to 500 Lux of ambient light present. However to comply with BS EN 9934-2:2015 levels must be restricted to 20 Lux.

Neoastra DGCW is a water based concentrate and should therefore be diluted before use. Typically one 500mL bottle of concentrate will make 25L of product. Neoastra DGCW it is not classified as hazardous after dilution.

Certified to meet Sulphur and Halogen levels required by military, nuclear and ASME standards.

Available in 500mL bottles.

Product Data:

Dilution Rate 50:1
UV Light >1000 μW/cm2
White Light <500 Lux
Flammability Non-Flammable
Carrier Fluid Water
Method Fluorescent
Temperature Range 5 to 50°C
Shelf Life 36 Months
Standards ISO 9934
ASTM E1444
ASTM E709

 

Safety and product data downloads:

Options

500ml bottle

Reviews

There are no reviews yet.

Be the first to review “Johnson & Allen NEOASTRA DGCW Fluorescent Magnetic Ink Concentrate”

Your email address will not be published.

Scroll to Top